Xem kết quả: / 0
Bình thườngTuyệt vời 

Technical Data.


Number of Coats: 2

Spreading Rate Per Coat: 2m2 / L

Wet Film Per Coat: 500 microns

Recoat (@25oC): 2-4 hours

Curing time: 7 days

Colour: Black

Thinner: Water

Shelf Life: 12 months

Application Guide.


Surface Preparation

  1. Surface must be clean, sound, dry and free of dust.
  2. Corroded metal areas should be wire brushed and treated with an anti - corrosive primer.
  3. Prime highly absorbent surfaces with 1 part Bitflex diluted with 5 parts of water.

Application Procedure and Equipment

  1. Stir product well.
  2. Apply to surface by brush, roller or airless spray gun. Soft brooms can be used on retaining walls.



  1. Do not apply when temperature is below 10oC or above 80% relative humidity.
  2. Do not apply in wet conditions or if rain is due.
  3. Do not use in applications under hydrostatic pressure.
  4. Temporarily protect the membrane from mechanical damage after application using polystyrene boards or an equally effective alternative.
  5. When applying Bitflex to retaining wall do not fill soil above level of application. Ensure that Bitflex is protected from damage when back filling.
  6. Bitflex remains water soluble until completely cured.
  7. A cement screed or topping is intended, the system must be over coated with a U.V. stable acrylic coating.

Transport and Storage.


Sizes: 20L

Weights: 21.5kg

Dangerous Goods Class: N/A

Flash Point: N/A

UN Number: N/A

Thống kê

Các thành viên : 194
Content : 276
Liên kết web : 7
Số lần xem bài viết : 1791752
mod_vvisit_counterThis week1243
mod_vvisit_counterThis month1439

Khách Online

Hiện có 22 khách Trực tuyến