Number of Coats: 2-3

Spreading Rate Per Coat: 6 - 10m² / L

Wet Film Per Coat: 100 - 166 microns

Recoat(@25oC): 1-2 hours

Curing time: 7 days

Colour: Clear

Thinner: N/A

Shelf Life: 12 months

Surface Preparation

1. Ensure all surfaces are clean, dry and free of contaiminants.
2. Any white efflorescence salts must be removed by either dry brushing with a stiff bristle brush or treatment with Crommelin Efflorescence Remover. Rinse thoroughly with clean water and allow to dry.
3. Ensure surface is dry by either testing with a moisture meter or by placing a square metre sheet of black plastic on an area most likely to be damp. Place into position as sun gains heat and remove as sun loses heat. If condensation appears on plastic, do not apply product. Repeat until no condensation appears.

Application Procedure and Equipment

1. Application equipment should be by airless spray or for small areas a roller suitable for solvent borne products.
2. Whilst substrate must be saturated, do not allow the liquid product to sit on any surface. If it does not penetrate. Spread surplus with a brush until saturated into surface.
3. 1st coat - apply and allow to dry.
4. Apply 2nd coat when the first is sufficiently dry (to touch).

1. Must be applied to a dry substrate.
2. Do not allow to pool during application

Sizes: 15L, 200L

Weights:15kg, 200kg

Dangerous Goods Class: 3

Hazchem Code: 3(Y)

Flash Point: 31^oC

UN Number: 1263

Poisions Schedule: 5