Xem kết quả: / 0
Bình thườngTuyệt vời 

Technical Data.


Mix Ratio: Refer to specifications

Curing time: 28 days

Appearance: Milky liquid

Thinner: Water

Shelf Life: 12 months

Coverage: Approx 1.5L/m2


Mix: 0.2L of 1 part Powerflex to 3 parts Water.

1kg of Cement

3kg Sand

Primer coat prior to screed placement:

1 part Powerflex to 1 part Water

Waterproof Render

Mix: 0.5L of 1 part Powerflex to 3 parts Water

1kg of Cement

3kg of Sand

Mechanical Properties:

  • Modulus of elasticity: 17000 N/mm2
  • Adhesion Strength: 2.5 - 3.5 N/mm2
  • Flexural Strength: > 13N/mm2
  • Compressive Strength: >65 N/mm2
  • Shrinkage: < 0.3mm/m2
  • Water absorption: <4%

Application Guide.


Surface Preparation

  1. Ensure all surfaces are clean, dry and free from dust, grease, oil and laitance, prior to application.
  2. Prior to applying a screed the substrate should be primed with a 1:1 mixture of Powerflex and water.
  3. Brush primer on at the pproximate rate of 6 - 12 m2 / L. Allow to become tacky then apply topping.
  4. For porous surface prime with a slurry coat, consisting of 1kg cement, 1 - 2kg of sand and 1:1 mixture of Powerflex and Water

Application Procedure and Equipment

  1. Add gauging liquid to sand /cement mix and ensure thorough dispersion prior to application.
  2. The mixes have a pot life of approximately 30 min. Batch sizes should be calculated accordingly.
  3. Apply concrete and mortars onto wet or tacky primer.
  4. Compact and level with screed bar, and finish with steel float.
  5. If over coating the screed, oleo-resinous floor finishes should be avoided.

Transport and Storage.


Sizes:4L, 20L

Weights: 4kg, 20kg

Dangerous Goods Class: N/A

Flash Point: N/A

UN Number: N/A

Thống kê

Các thành viên : 427
Content : 276
Liên kết web : 7
Số lần xem bài viết : 1925675
mod_vvisit_counterThis week201
mod_vvisit_counterThis month5497

Khách Online

Hiện có 14 khách Trực tuyến