Acrylic Modifier

Xem kết quả: / 0
Bình thườngTuyệt vời 

Technical Data.

 

Mix Ratio: 15% Modifier to cement weight

Curing Time: 28 days

Colour: Milky liquid

Thinner: Water

Shelf Life: 12 months

Plain O.P.C. modified with CROMMIXTM Acrylic Modifier

Tensile Strength (N/mm2)

Flexural Strength (N/mm2)

Compressive Strength (N/mm2)

Impact Strength (inch/pound)

Shear Bond (N/mm2)

Before

 

1.6

4.2

16.5

6.0

0.3

After

 

4.2

10.9

39.4

16.0

4.5

Slurry Coating

  • Portland Cement: 2 kg
  • Fine Sand: 1kg
  • Acrylic Modifier: 2L
  • Mix approximately: 3L
  • Coverage: 15m2(approx.)

Waterproof Render of Motar (min. 10mm thinckness)

  • Dry clean (clay free) sand: 120 kg.
  • Portland cement: 40kg.
  • Acrylic Modifier: 30L
  • Water: Min required
  • Approximate volume of mix: 93L
  • Coverage: 9.3m2 @10mm

Light Duty Granolithic Topping

  • Flooring sand: 40kg
  • Portland cement: 20kg
  • Acrylic Modifier: 9.6L
  • Water: Min required
  • Approximate volume of mix: 32L
  • Coverage: 5.3m2 @ 6mm
  • Coverage: 3.2m2 @ 10mm

Concrete Repair, Cement Render, Title Grouting, Tile Bedding

  • Sand: 40kg
  • Portland Cement: 20kg
  • Acrylic Modifier: 8L
  • Water: Min required
  • Approximate volume of mix: 30L
  • Coverage: 3m2 @ 10mm
  • Coverage: 5m2 @ 6mm

Underlayment Levelling Screed

  • Flooring sand: 120kg
  • Portland Cement: 40kg
  • Acrylic Modifier: 24L
  • Water: Min. required
  • Approximate volume of mix: 85L
  • Coverage: 14m2 @ 6mm
  • Coverage: 8.5m2 @ 10mm

Heavy Duty Granolithic Topping

  • Granite chips (3mm): 30kg
  • Flooring sand: 30kg
  • Portland Cement: 20kg
  • Acrylic Modifier: 9.6L
  • Water: Min. required
  • Approximate volume of mix: 40L
  • Coverage: 6.4m2 @ 6mm
  • Coverage: 3.2m2 @ 12mm

Application Guide.

 

Surface Preparation

  1. Substrate should be primed with a 1:1 mixture of Acrylic Modifier and Water.
  2. Brush on at the approximate rate of 6 - 12m2 / L.
  3. Allow to become tacky then apply topping.
  4. For porous surfaces prime with a slurry coat (refer Specifications for mix recommendation)

Application Procedure and Equipment

  1. Apply concrete and mortars as per normal practice.

Transport and Storage.

 

Sizes: 1L, 4L, 20L

Weights: 1.1kg, 4.5kg, 21.5kg

Dangerous Goods Class: N/A

Flash Point: N/A

UN Number: N/A

Thống kê

Các thành viên : 181
Content : 276
Liên kết web : 7
Số lần xem bài viết : 1256713
mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday95
mod_vvisit_counterYesterday278
mod_vvisit_counterThis week1603
mod_vvisit_counterThis month1878
mod_vvisit_counterAll852694

Khách Online

Hiện có 24 khách Trực tuyến