Xem kết quả: / 0
Bình thườngTuyệt vời 

Technical Data.

Application Guide.

Surface Preparation

1. For old concrete floors, restore surface by patching, filling, grouting, etc. Surfaces must be cleaned to be free of any oil, dirt, dust and other foreign matter. Any incompatible sealers/coatings to be removed by power tools or strippers.

Application Porcedure and Equipment

1. CROMFLOOR^TM Safecure is to be used as supplied in the container without thinning.
2. To cure, harden and dust - proof new concrete floors, CROMFLOOR^TM Safecure shall be spray applied to concrete surfaces immediately after the disappearance of the surface water and when it is no longer marred by foot traffic.
3. Spray surfaces uniformly leaving no pinholes or gaps, at a rate not exceeding 5m²/ L. If spray equipment is not available, apply with a soft bristle broom or lambs wool applicator, as soon as the floor is hard enough to walk on. Avoid puddles or build up of surface film.
4. If a second coat is necessary to uniformly seal the porosity of the concrete, or for improved dust proofing, allow overnight drying of the first coat before applying second coat.
5. After the work of the other construction trades is completed, the application of one coat of CROMFLOOR^TM Safecure is recommended, particularly if only one coat was initially applied. Clean the surface thoroughly and allow to dry. Apply the second coat as outlined above.

Precautions.

Transport and Storage.