Number of Coats: 2

Spreading Rate Per Coat:

• New Concrete: 10 m² / L
• Old / Dusting Concrete: 6 - 8 m² / L

Wet Film Per Coat: 100 - 167 microns

Recoat (@25⁰C): 30 mins

Curing time: 48 hours

Colour: Clear

Thinner: Water

Shelf Life: 12 months

Surface Preparation

1. For new concrete, ensure concrete had been cured for at least 28 days. Ensure all traces of oil or other contaminants are removed, as this may affect adhesion.
2. For old concrete, remove all contaminants by mechanical or chemical means, such as detergent wash, household bleach and high - pressure washing. The level of cleaning will determine the final appearance that will be achieved.

Application Procedure and Equipment

1. Before application, assess the porosity of the concrete. If the concrete has little or no porosity, dilute CROMFLOOR^TM Rocfloor 1:1 with water and apply this diluted mixture at rate of 10 m² / L. This will assist in good penetration.
2. If the first coat imparts a well-seal surface, to prevent a high gloss finish, dilute the second coat 1:1 with water as well, and apply at a rate of 10m² / L. If a high gloss finish is required the second coat may be applied undiluted.
3. For older, worn / dusting concrete, dilution is not required.

• Do not apply CROMFLOORTM Rocfloor if the temperature is below 10⁰C, or if relative humidity is above 85% or if rain is imminent.
• Do not apply CROMFLOORTM Rocfloor to wet substrates - moisture content should be less than 15%. Check with a moisture meter.

Size: 20L ; 200L

Weights: 20.5 kg ; 210kg

Dangerous Goods Class: N/A

Flash Point: N/A

UN Number: N/A